Hamsters need a lot of space to move, eat and sleep. Modern rodent cages do not offer much space, or they will cost too much. In such circumstances, to make the life of a fluffy pet as comfortable as possible, it makes sense to create a house for the hamster with your own hands.
How to make a cage for a hamster do-it-yourself at home?
Below are three different in complexity options, how to make a house for a hamster with your own hands at home, which will help create a comfortable and affordable shelter for your
Options for creating a house for a hamster quite.
For those who desperately need a happy and healthy habitat for their hamsters or cannot afford more expensive cages, there is a great option – to make a home for a hamster with your own hands. If there is no cage available for use, you can go to the hardware store and buy a galvanized steel mesh with a small cell (0.5-1 cm), which is suitable for any hamster.
Equipment to create hamster cage:
the plastic container of the desired size;
Do-it-yourself hamster cage – instructions for creating:
Cut from a grid piece of a square or rectangular shape, which will become the windows in the cage for a hamster.
Mark the edges in a plastic container to indicate where the mesh windows will be inserted, then to get an idea of where to cut them.
The window should be slightly smaller than the grid because you need to have at least 2 cm of flexible space to secure the network with cable ties.
For the places marked with a marker, you need to cut the windows in a plastic container.
The adhesive tape should be applied to the outside of the cutting line to complicate the process of breaking the container during cutting.
Then you need to put the net back to decide where to put the cable ties and mark them with dots.
Now it’s time to turn on the soldering iron to make holes in the marked places.
Remove the plastic edges that protrude from the inside of the container – a hamster can get hurt about them.
Place the cable ties as you wish.
Secure the mesh and secure the ties so that they are covered before cutting them with pliers or scissors.
Now you can do the same with the container lid.
Can be made from a conventional plastic container
To give the hamster even more space for movement, you can make two such cages, put them one on another and connect them with a tunnel for hamsters.
You can cut a hole in the bottom of the top box and the top of the lid and place the pipes in this way. You can do this from side to side. The main thing is to make sure that the tubes are well secured, as the hamster cannot push them out or chew around and run away.
There are other ways to connect without using tubes. If large hamster cages or contiguous shelves are created, the hamster can directly jump into another through the hole. You can make stairs from ice cream sticks.
This is all perfect for the Dzungar hamster, but the Syrian need a full tube.
House for a hamster from the aquarium
If you already have a decent sized aquarium, you can turn it into a hamster cage with minimal problems. However, you need to know how to do it properly, and the advantages and disadvantages of using an aquarium as a cage for a hamster.
How to make a house for a hamster from the aquarium – tools:
bowls for water and food.
Ready house from the aquarium
How to make a house for a hamster with your own hands
Selection of materials for the hamster cage
To effectively turn an aquarium into a place where a hamster can live, you will need to use the right materials. The aquarium that is used should have at least 1 square meter of space, but more is always better. If the aquarium is small, it will not be the best option to use.
You will also need a cover for the cage for storing a hamster. It should be made of fine wire mesh or plastic with holes, as it must be well ventilated. You need to pick up the weights for the cover so that it is well kept in place.
Good chips can be bought at the pet store.
Bed linen is also essential to line the cage. Do not use fluffy bedding, such as cotton, as it can stifle or cause lethal problems with the hamster’s digestion. You should also avoid cedar and wood chips or shavings. Other wood chips are great and should be available at a pet shop.
Furniture that will be added depends on personal taste, but minimum requirements are listed. Do not use a hamster wheel with gaps or holes, such as a wire wheel, as this may damage it.
Clean the aquarium thoroughly using a mixture of water and a small amount of bleach. It is necessary to remove all traces of any animal that lived in the aquarium before and make sure that the hamster does not get dirt or germs from the aquarium. Once it is clean, rinse the aquarium thoroughly and allow it to dry. The aquarium should be thoroughly cleaned.
You need to line the bottom of the cage with bed linen of your choice. It will take a layer several centimeters thick – enough for the future occupant to dig and move in it. It is necessary to change this bed linen weekly. This can be the main drawback of an aquarium — washing it out and cleaning it weekly. It requires much more work than a wire cage.
Now that the aquarium is set up, it’s time to add furniture for the hamster. Place a food bowl, water bowl, cover, and wheel in it.
Water bowls are a little problematic, as the hamster can knock them down, creating confusion and leaving the bottom of the cage wet. You need to frequently check the drinker to make sure that this did not happen, and replace it and damp bedding if this happens. Excessive moisture can cause hamster health problems.
An individual drinker should be attached as the hamster will often turn over the bowl with water.
Finally, you need to put a ventilated lid on top and, if necessary, weight it.
How to make a house for the hamster with your own hands from a plastic container
What you need:
large transparent plastic box;
water bottle with wire nozzles;
It is essential to drill as many air holes in the plastic box as possible. Unfortunately, plastic bins heat up reasonably quickly, so you need a large number of holes in the container. You need about 14 holes at the top and bottom of each side of the box and about 100 on the lid. Each of the holes has a diameter of about 1 cm.
Clean the air holes. This is a significant step. Sometimes the drills leave protruding plastic shards. You need to get rid of all of these areas, because they can cause choking or blockage of the intestines in an animal. You can do this by carefully rubbing the inside of the container with emery paper. Add wheel, drinker, and bedding to the cage
It is necessary to attach the bottle to the outside of the box to provide easy access when changing water. This can be done by drilling a large hole in the side of the cage and attaching it with wire or coils that come with a bottle of water for the hamster.
And in the end, you need to put in the box bedding, as is the case with an aquarium, as well as a bowl for food.